Description
Turn your Altman 360Q or ETC Source Four Ellipsoidal into a bright, focusable, DMX512-controllable strobe with the Ellipsoidal Strobe Module from Diversitronics.
This model is a lightweight DMX strobe module that plugs easily into an ETC Source 4 ellipsoidal by simply switching end caps and attaching a lightweight (2.2 lbs) external power supply via a 3′ plugable umbilical cable. Flash control signals come from a simple, low voltage Diversitronics Striker Remote or Strobe Runner or directly from a DMX control board.
Features:
- Single flash, burst, variable intensity and variable rate
- DMX and analog control
- Small, light weight package (2.2 lbs.)
- Lamp life: 2 million flashes avg.; dependent on temp., rate,intensity and duty cycle; range 1,000,000 at max. continuous duty cycleto 10 million at 25% duty cycle
- Fast recycle with 15 flashes/second
- Easy to install
- Replaceable quartz xenon lamp
- Operates from standard 120 Volt 50/60 Hz line voltage, specify – 240 if 240 volt 50/60 Hz operation required.
- Output 22 joules / flash
- Color temperature 5600 Deg K
- Microprocessor DMX-512 control on individual rates and intensities (2 channels)
- Digital assignment selector – systems of up to 256 strobes
- Power supply has 5-pin XLR connectors for DMX inputs/outputsaswell as modular analog inputs/outputs
- Auto recognition of control scheme
- Daisy-chain analog control compatible
- Self-resetting safety thermal switch (55 degrees C)
- Not phase sensitive
- Status indicator LED
- Valid DMX signal indicator LED
- Power on LED
- Can be used with Diversitronics Striker Remote and Strobe Runner or industry standard DMX controllers
- Power requirements: At 120V 2 fixtures/15Amp circuit. At 240V 4 fixtures/16 Amp circuit
- Power supply: 7″H x 5″W x 4″D (with bracket); 2.2 lbs. hanging weight
